fox electronics 5570 enterprise parkway fort myers, florida 33905 usa +1.239.693.0099 fax +1.239.693.1554 www.foxonline.com emea tel: +44 .11283.568153 | canada +1.888.438.2369 | asia hong kong tel: +852.2854.4285 | japan tel: +81.3.3374.2079 ? 2011 fox electronics | iso9001:2008 certified 1.8v ~ 3.3v smd tcxo for gps applications rev. 1/25/2011 rohs compliant / pb free http://www.foxonline.com/need_a_sample.htm model: fox922-gp series page 1 of 2 features ? 0.5ppm stability ? supply voltages of 1.8v ~ 3.3v ? 1.0mm height max ? clipped sine output 1 4 2 tp 3 tp top view dot denotes pin 1. top view bottom view recommended solder pad layout all dimensions are in millimeters. #4 #3 #2 #1 2.2 max 1.55 2.3 0.6 1.2 0.75 1.8 1.0 max 2.7 max 1.45 0.65 2.80 2.30 tp tp 4 3 2 1 pin connections vcxo #1 gnd #3 output #2 gnd #4 v dd vctcxo #1 v c #3 output #2 gnd #4v dd see table below -30oc ~ +85oc -40oc ~ +85oc 1.8v ~ 3.3v 2.0ma 2.0ppm 0.5ppm 0.2ppm 0.2ppm 0.8v min. (10k? //10pf) 10% 3 ~ 5 ppm 1.0 ppm -145 dbc/hz typ. 260oc / 10 seconds 1 au parameters available frequencies (f o ) temperature range operating (t opr ) storage (t stg ) supply voltage (v dd ) input current (i dd ) vdd=1.8v ~ 3.0v initial frequency tolerance @ 25oc (after 2 reflows) (vctcxo: v c = 50%v dd ) 1 frequency stability over temperature range over supply voltage change (v dd 5%) over load change (10k? //10pf) 10% output waveform (clipped sine) peak-to-peak level (vp-p) output load pullability (vctcxo) v dd = 2.5v~3.3v, v c = 50% v dd 1.0v v dd = 1.8v, v c = 0.90.6v aging per year phase noise (16.369 mhz, @ 10khz offset) reflow soldering temp moisture sensitivity level (msl) termination finish ? electrical characteristics max (unless otherwise noted) 3.3v5% 3.3v5% 3.0v5% 3.0v5% 2.8v5% 2.8v5% 2.7v5% 2.7v5% 2.5v5% 2.5v5% 1.8v5% 1.8v5% tcxo vctcxo tcxo vctcxo tcxo vctcxo tcxo vctcxo tcxo vctcxo tcxo vctcxo fox922c-gp fox922ce-gp fox922b-gp fox922be-gp fox922d-gp fox922de-gp fox922f-gp fox922fe-gp fox922g-gp fox922ge-gp fox922l-gp fox922le-gp model number part number 839cgp-frequency-xxxxx 840cgp-frequency-xxxxx 839bgp-frequency-xxxxx 840bgp-frequency-xxxxx 839dgp-frequency-xxxxx 840dgp-frequency-xxxxx 839fgp-frequency-xxxxx 840fgp-frequency-xxxxx 839ggp-frequency-xxxxx 840ggp-frequency-xxxxx 839lgp-frequency-xxxxx 840lgp-frequency-xxxxx ? part number selection learn more - internet required supply voltage(v dd ) tcxo/vctcxo preliminary ? standard frequencies 2&3 16.367667 mhz 16.800 mhz 26.000 mhz 38.400 mhz 16.369 mhz 24.5535 mhz 33.600 mhz 16.368 mhz 19.200 mhz 27.456 mhz 1 for proper operation, a control voltage (vc) must be applied to pin 1 on vctcxo's. 2 does not imply a stocked part. all frequencies may not be available for all v dd . 3 other fequencies may be available. contact fox technical support with your requirements. *dimensional drawing is for reference to critical specifications defined by size measurements. certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may very.all specifications subject to change without notice.
23 fox electronics 5570 enterprise parkway fort myers, florida 33905 usa +1.239.693.0099 fax +1.239.693.1554 www.foxonline.com emea tel: +44 .11283.568153 | canada +1.888.438.2369 | asia hong kong tel: +852.2854.4285 | japan tel: +81.3.3374.2079 ? 2011 fox electronics | iso9001:2008 certified 1.8v ~ 3.3v smd tcxo for gps applications 1.8v ~ 3.3v smd tcxo for gps applications rev. 1/25/2011 rohs compliant / pb free http://www.foxonline.com/need_a_sample.htm model: fox922-gp series page 2 of 2 ? tape specifications (millimeters) model fox922-gp a ?1.5 b 4.0 c 4.0 d 3.5 e 8.0 f 1.4 std reel qty 3,000 ? reel specifications (millimeters) g 2.0 h ?13 i ?21 j ?60 k ?180 l 9.0 m 2.0 model fox922-gp
|
